š¢ Enclosure A1 Project ā Slight Delay, But for a Good Reason! š
- enrico mazzarol
- Mar 11
- 1 min read
Hey Makers,
Quick update on Enclosure A1ā¦ yeah, I know, Iām running a little behind schedule (max 6 days, I promise! š). But hear me outāI've been obsessing over the side box doors for the filament. They had to be just right, and wellā¦ I got a little stuck in perfectionist mode. š¤·āāļø
Right now, the front doors are printing, the AMS Lite is installedĀ (just need to extend a few NFC sensor cables, might take some trial and error to match the right filament number), and the setup has been running for 20 daysĀ on my Drawer A1āno screws, no glue, no weird hacks. Just set it down and go! šļøāØ
One last tweak: the hot air pipeĀ isnāt directing airflow evenly, so Iāll need to add a small fin inside the PolydryerĀ to balance things out. Iāll probably use ASA or ABS, but Iāll see if I can avoid it. š§
š§ This project is complex, but also awesomeāboth in functionality and sheer size!Ā Hope you like the pics, and thanks for your support and patience. Canāt wait to show you the final result! š
See you soon,Enrico
cool project. when is the release?
Cāest un super boulot ! Merci pour lāingĆ©niositĆ©.
How long was the build time ? roughly how many rolls of filament? Does it sit directly on the draw or is it integrated onto it? Very intrigued.
that will be really cool.š
Take your time, even if it takes 2 or 3 weeks longer or even more.
When I first saw this, I thought that's neat but its not for me. But the more you post the more I'm thinking.....I think I might be buying a crate of filament to build this hahaha. Thank you for sharing, this is really cool.